Unable to print to Samsung M2825ND on Arch Linux

I'm using the printer Samsung M2825ND in my home network. It worked great so far, as well as on Linux as on Windows, but since I re-installed Arch Linux on my laptop, I cannot print any longer. Here's how I set it up: I installed, activated and started cups and avahi: pacman -S cups cups-filters ghostscript systemctl enable org.cups.cupsd.service systemctl start org.cups.cupsd.service pacman -S nss-mdns systemctl enable avahi-daemon.service systemctl start avahi-daemon.service In the file /etc/nsswitch.conf, I extended the line hosts: files mymachines myhostname resolve [!UNAVAIL=return] dns to hosts: files mymachines myhostname mdns_minimal [NOTFOUND=return] resolve [!UNAVAIL=return] dns as described on the Arch Linux Wiki . Then I downloaded the pxlmono-Samsung driver , which I used earlier, and moved it to /usr/share/cups/model/samsung.ppd. Then I figured out the parameters with lpinfo: $ lpinfo -m | grep samsung samsung.ppd Samsung M262x 282x Series PXL driverless:ipp://samsung.local:631/ipp/print Samsung M262x 282x Series, driverless, cups-filters 1.21.2 $ sudo lpinfo -v network ipp network socket network beh network http network https network lpd network ipps network dnssd://samsung._printer._tcp.local/ network lpd://192.168.178.10/ network ipp://samsung.local:631/ipp/print There are different network options, and since I always used dnssd so far, I configure it that way: $ sudo lpadmin -p samsung -E -v 'dnssd://samsung._printer._tcp.local/' -m samsung.ppd I set the printer as my default, use A4 as paper size and activate long-edge duplex printing: $ lpoptions -d samsung $ lpoptions -o PageSize=A4 $ lpoptions -o sides=two-sided-long-edge $ lpoptions device-uri=ipp://samsung._ipp._tcp.local/ PageSize=A4 printer-info=samsung printer-location printer-make-and-model='Samsung M262x 282x Series' printer-type=16810068 sides=two-sided-long-edge But when I try to print a document using lpr document.txt, the file is just stuck in the queue with any other information. How can I find the error here?