Usb wifi adapter problem

I have a usb wifi adapter (Edimax EW-7612UAn V2 ) with its driver installed on my parrot system and my computer's pci is not compatible with parrot .The problem is parrot says both adapters are disabled when i use normal wifi and when I use airmon-ng the usb wifi adapter works well and the computer's pci ,of course, doesn't work. when putting my pci in monitor and my usb wifi adapter in managed mode, network manager removes both of them from the wifi menu although the usb adapter is not in the monitor mode. In other words, parrot won't recognize both adapters if the main pci isn,t compatible or recognizable. so, what should i do to force parrot to use the usb wifi adapter only ? lsusb -v result: Bus 002 Device 003: ID 7392:7822 Edimax Technology Co., Ltd 802.11n WLAN Adapter Couldn't open device, some information will be missing Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x7392 Edimax Technology Co., Ltd idProduct 0x7822 bcdDevice 2.00 iManufacturer 1 iProduct 2 iSerial 3 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 0x002e bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 500mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 4 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x03 EP 3 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x84 EP 4 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 1 screenshot of network manager result of rf-kill: 0: hp-wifi: Wireless LAN Soft blocked: no Hard blocked: yes 1: hp-bluetooth: Bluetooth Soft blocked: no Hard blocked: yes 2: phy0: Wireless LAN Soft blocked: no Hard blocked: no 3: phy1: Wireless LAN Soft blocked: no Hard blocked: yes result of ifconfig : eth0: flags=4099 mtu 1500 ether 34:64:a9:73:43:20 txqueuelen 1000 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 lo: flags=73 mtu 65536 inet 127.0.0.1 netmask 255.0.0.0 inet6 ::1 prefixlen 128 scopeid 0x10 loop txqueuelen 1000 (Local Loopback) RX packets 8 bytes 396 (396.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 8 bytes 396 (396.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0