Route all traffic through openconnect

I'm trying to connect to a business VPN (Cisco AnyConnect). I'm utilizing openconnect and a connection has been established. That connection is also seen by the ip add command. The default route according to ip route seems to be wlp5s0. How would I configure openconnect in such a way that rather than utilizing this route, it should select the VPN one? The issue I have is that my IP address won't change once I've connected to the VPN. I have tried the terminal openconnect version and the gnome GUI install for Cisco. Same problem with both. 1: lo: mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eno1: mtu 1500 qdisc fq_codel state DOWN group default qlen 1000 link/ether XX:XX:XX:XX:XX:XX brd ff:ff:ff:ff:ff:ff 3: wlp5s0: mtu 1500 qdisc fq_codel state UP group default qlen 1000 link/ether YY:YY:YY:YY:YY:YY brd ff:ff:ff:ff:ff:ff inet 192.111.111.111/24 brd 192.111.111.255 scope global dynamic noprefixroute wlp5s0 valid_lft 86208sec preferred_lft 86208sec inet6 ffff::ffff:ffff:ffff:ffff/64 scope link noprefixroute valid_lft forever preferred_lft forever 4: vpn0: mtu 1300 qdisc fq_codel state UP group default qlen 500 link/none inet 192.111.11.111/22 brd 192.111.111.255 scope global noprefixroute vpn0 valid_lft forever preferred_lft forever inet6 eeee::eeee:eeee:eeee:eeee/64 scope link stable-privacy valid_lft forever preferred_lft forever *Not quite sure what's safe to share and not, so I just modified some of the entries.* This is the ip route entry default via 192.168.1.1 dev wlp5s0 proto dhcp metric 600 10.0.0.0/8 dev vpn0 scope link 10.0.0.2 dev vpn0 scope link 10.0.0.3 dev vpn0 scope link /23 dev vpn0 scope link via 192.168.1.1 dev wlp5s0 src 192.168.1.17 169.254.0.0/16 dev wlp5s0 scope link metric 1000 172.16.0.0/12 dev vpn0 scope link /22 dev vpn0 scope link /24 dev vpn0 scope link 192.168.0.0/16 dev vpn0 scope link 192.168.1.0/24 dev wlp5s0 proto kernel scope link src 192.168.1.17 metric 600 192.168.20.0/22 dev vpn0 scope link I'm trying to reach 10.12.122.197 which should be within the same LAN as the VPN. Running Ubuntu 19.10 by the way.