Arduino: avrdude: ser_open(): can't open device "/dev/ttyACM1": Input/output error

I use arduino ide on arch linux with arduino uno connected via USB. I am sure that I choosed right port and board in ide menu. when I run ls -l /dev/ttyACM* I get:

crw-rw---- 1 root uucp 166, 0 14. dub 12.44 /dev/ttyACM0
crw-rw-rw- 1 root uucp 166, 1 14. dub 12.54 /dev/ttyACM1

but when I click upload I get this error:

Sketch uses 440 bytes (1%) of program storage space. Maximum is 32256 bytes.
Global variables use 9 bytes (0%) of dynamic memory, leaving 2039 bytes for local variables. Maximum is 2048 bytes.

avrdude: Version 6.3, compiled on Jul  7 2020 at 19:38:43
         Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/ 
         Copyright (c) 2007-2014 Joerg Wunsch

         System wide configuration file is "//etc/avrdude.conf"
         User configuration file is "/home/john/.avrduderc"
         User configuration file does not exist or is not a regular file, skipping

         Using Port                    : /dev/ttyACM1
         Using Programmer              : arduino
         Overriding Baud Rate          : 115200
avrdude: ser_open(): can't open device "/dev/ttyACM1": Input/output error

avrdude done.  Thank you.

the selected serial port 
 does not exist or your board is not connected

Error remains on newest linux kernel and LTS. --- My device is Lenovo thinkpad X390: Linux 5.11.14-arch1-1 --- When I plug arduino to usb and then run sudo dmesg I get this messages:

[ 1605.378324] usb 1-4: new full-speed USB device number 14 using xhci_hcd
[ 1605.520509] usb 1-4: New USB device found, idVendor=2341, idProduct=0043, bcdDevice= 0.01
[ 1605.520517] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=220
[ 1605.520521] usb 1-4: Manufacturer: Arduino (www.arduino.cc)
[ 1605.520523] usb 1-4: SerialNumber: 7583434383935150E152
[ 1605.523881] cdc_acm 1-4:1.0: ttyACM1: USB ACM device
[ 1630.618749] usb 1-9: reset full-speed USB device number 10 using xhci_hcd
[ 1630.792727] audit: type=1130 audit(1618567069.016:82): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=fprintd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 1632.601215] audit: type=1100 audit(1618567070.822:83): pid=29714 uid=1000 auid=1000 ses=1 msg='op=PAM:authentication grantors=? acct="john" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/1 res=failed'
[ 1635.720577] audit: type=1100 audit(1618567073.942:84): pid=29714 uid=1000 auid=1000 ses=1 msg='op=PAM:authentication grantors=pam_faillock,pam_permit,pam_faillock acct="john" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/1 res=success'
[ 1635.721507] audit: type=1101 audit(1618567073.942:85): pid=29714 uid=1000 auid=1000 ses=1 msg='op=PAM:accounting grantors=pam_unix,pam_permit,pam_time acct="john" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/1 res=success'
[ 1635.722751] audit: type=1110 audit(1618567073.946:86): pid=29714 uid=1000 auid=1000 ses=1 msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_faillock acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/1 res=success'
[ 1635.727018] audit: type=1105 audit(1618567073.949:87): pid=29714 uid=1000 auid=1000 ses=1 msg='op=PAM:session_open grantors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/1 res=success'

--- How can I fix this ? Thank you for help **PS:** If you need any more information, comment below and I will add it soon as possible.