Need to measure pairwire (ip based) bandwidth used over time when using TC

I need to measure the datarates of packets between multiple servers. I need pairwise bandwidths between the servers (if possible even the ports), not the overall datarate per interface on each server. **Example output** | Timestamp | Server A to B | Server B to A | Server A to C | Server C to A | | -------- | -------------- | -------------- | -------------- | -------------- | | 0 | 1 | 2 | 1 | 5 | | 1 | 5 | 3 | 7 | 1 | **What I tried or thought of** 1. tcpdump - I was capturing all the packets and looking at ip.len for getting the datarates. It worked quite well till I started testing along with TC. Turns out tcpdump captures packets at a lower layer than TC. So, the bandwidths I measure using this can't see the limit set by TC. 2. netstat - I tried using this by greping the output and look at Recv-Q and Send-Q columns. But later I found out that it reports the bytes that have been received and are buffered, waiting for the local process that is using this connection to read and consume them. I won't be able to use them to get bandwidth being used. 3. iftop - Amazing GUI and has all the things I need. But no way to get the output in a good way to process. Might also overwhelm the storage because of the amount of extra text it stores along with. 4. bwm-ng - Gives overall datarate per interface on each server but not pairwise. Please let me know if there are any other ways to achieve what I need. Thanks in advance for your help.