Resetting logical Direct-Access Error || RHEL 7.x

We have an error for the LVM resetting device which has been impacting our Linux server during this period. kernel: hpsa 0000:02:00.0: scsi 0:1:0:1: resetting logical Direct-Access HP LOGICAL VOLUME RAID-1(+0) SSDSmartPathCap- En- Exp=1 kernel: hpsa 0000:02:00.0: device is ready. Below current SCSI disks. [0:0:0:0] storage HP P420i 6.68 - [0:1:0:0] disk HP LOGICAL VOLUME 6.68 /dev/sda [0:1:0:1] disk HP LOGICAL VOLUME 6.68 /dev/sdb [1:0:0:0] tape HP Ultrium 4-SCSI U57D /dev/st0 [2:0:0:0] cd/dvd hp DVD A DU8D4SH MHE4 /dev/sr0 Also by checking the disks, we didn't find any HW failure. Smart Array P420i in Slot 0 (Embedded) Note: Predictive Spare Activation Mode is enabled, physical drives that are in predictive failure state will not be available for use as data or spare drives. (sn: 00143803620FFA0) Port Name: 1I Port Name: 2I Internal Drive Cage at Port 1I, Box 1, OK Internal Drive Cage at Port 2I, Box 1, OK array A (SAS, Unused Space: 0 MB) logicaldrive 1 (279.4 GB, RAID 1, OK) physicaldrive 1I:1:1 (port 1I:box 1:bay 1, SAS, 300 GB, OK) physicaldrive 1I:1:2 (port 1I:box 1:bay 2, SAS, 300 GB, OK) physicaldrive 1I:1:3 (port 1I:box 1:bay 3, SAS, 300 GB, OK, spare) array B (SAS, Unused Space: 0 MB) logicaldrive 2 (558.7 GB, RAID 1+0, OK) physicaldrive 1I:1:4 (port 1I:box 1:bay 4, SAS, 300 GB, OK) physicaldrive 2I:1:5 (port 2I:box 1:bay 5, SAS, 300 GB, OK) physicaldrive 2I:1:6 (port 2I:box 1:bay 6, SAS, 300 GB, OK) physicaldrive 2I:1:7 (port 2I:box 1:bay 7, SAS, 300 GB, OK) physicaldrive 2I:1:8 (port 2I:box 1:bay 8, SAS, 300 GB, OK, spare) SEP (Vendor ID PMCSIERA, Model SRCv8x6G) 380 (WWID: 500143803620FFAF) This error was found only on one of the servers while others not suffering from the same problem. I am trying to find a way to detect the problem fix as all topics going to a hw faulty while I didn't find any HP HW failures