I have enabled
tlp to enable charge_control_end_threshold = 80%.
However, this is not surviving a reboot. After a rebbot, I am getting:
sudo systemctl status tlp.service
○ tlp.service - TLP system startup/shutdown
Loaded: loaded (/usr/lib/systemd/system/tlp.service; enabled; preset: disabled)
Drop-In: /usr/lib/systemd/system/service.d
└─10-timeout-abort.conf
Active: inactive (dead)
Docs: https://linrunner.de/tlp
sudo tlp-stat -b
[sudo] password for rudra:
--- TLP 1.6.1 --------------------------------------------
+++ Battery Care
Plugin: asus
Supported features: charge threshold
Driver usage:
* natacpi (asus_wmi) = active (charge threshold)
Parameter value range:
* STOP_CHARGE_THRESH_BAT0/1: 0(off)..100(default)
+++ Battery Status: BAT0
/sys/class/power_supply/BAT0/manufacturer = ASUSTeK
/sys/class/power_supply/BAT0/model_name = ASUS Battery
/sys/class/power_supply/BAT0/cycle_count = 104
/sys/class/power_supply/BAT0/energy_full_design = 75086 [mWh]
/sys/class/power_supply/BAT0/energy_full = 68032 [mWh]
/sys/class/power_supply/BAT0/energy_now = 52042 [mWh]
/sys/class/power_supply/BAT0/power_now = 2997 [mW]
/sys/class/power_supply/BAT0/status = Discharging
/sys/class/power_supply/BAT0/charge_control_end_threshold = 100 [%]
Charge = 76.5 [%]
Capacity = 90.6 [%]
I have to restart the service manually again to get the things back:
sudo systemctl restart tlp.service
sudo systemctl status tlp.service
● tlp.service - TLP system startup/shutdown
Loaded: loaded (/usr/lib/systemd/system/tlp.service; enabled; preset: disabled)
Drop-In: /usr/lib/systemd/system/service.d
└─10-timeout-abort.conf
Active: active (exited) since Sun 2024-10-06 00:26:51 IST; 1s ago
Invocation: c137b95091b2476c9c72f885dafe5bda
Docs: https://linrunner.de/tlp
Process: 5091 ExecStart=/usr/sbin/tlp init start (code=exited, status=0/SUCCESS)
Main PID: 5091 (code=exited, status=0/SUCCESS)
Mem peak: 7.6M
CPU: 231ms
Oct 06 00:26:51 roddur systemd: Starting tlp.service - TLP system startup/shutdown...
Oct 06 00:26:51 roddur tlp: Applying power save settings...done.
Oct 06 00:26:51 roddur tlp: Setting battery charge thresholds...done.
Oct 06 00:26:51 roddur systemd: Finished tlp.service - TLP system startup/shutdown.
sudo tlp-stat -b
--- TLP 1.6.1 --------------------------------------------
+++ Battery Care
Plugin: asus
Supported features: charge threshold
Driver usage:
* natacpi (asus_wmi) = active (charge threshold)
Parameter value range:
* STOP_CHARGE_THRESH_BAT0/1: 0(off)..100(default)
+++ Battery Status: BAT0
/sys/class/power_supply/BAT0/manufacturer = ASUSTeK
/sys/class/power_supply/BAT0/model_name = ASUS Battery
/sys/class/power_supply/BAT0/cycle_count = 104
/sys/class/power_supply/BAT0/energy_full_design = 75086 [mWh]
/sys/class/power_supply/BAT0/energy_full = 68032 [mWh]
/sys/class/power_supply/BAT0/energy_now = 51675 [mWh]
/sys/class/power_supply/BAT0/power_now = 5834 [mW]
/sys/class/power_supply/BAT0/status = Discharging
/sys/class/power_supply/BAT0/charge_control_end_threshold = 80 [%]
Charge = 76.0 [%]
Capacity = 90.6 [%]
In tlp-support, there is a similar report, but in that case, the asus battery was not detected: https://linrunner.de/tlp/faq/battery.html#faq-asus-threshold-not-set-on-boot
But, in this case, battery is detected, hence I am bit hesitant to unload asus-wsi module. Any help please?
Asked by BaRud
(1699 rep)
Oct 5, 2024, 07:06 PM