activating LV 'pve/data' failed: Check of pool pve/data failed (status:1). Manual repair required! (500)

Good afternoon, I'm asking for help in recovering damaged metadata after a 220V drop on the server, when the power was restored and the server booted up, I got an error in the Proxmox panel activating LV 'pve/data' failed: Check of pool pve/data failed (status:1). Manual repair required! (500) then booted from LiveCD debian mounted corrupted metadata and tried to repair root@debian:/home/user# lvchange -ay /dev/pve/data_tdata Do you want to activate component LV in read-only mode? [y/n]: y Allowing activation of component LV. root@debian:/home/user# lvs LV VG Attr LSize Pool Origin Data% Meta% Move Log Cpy%Sync Convert vm-102-disk-0 local-hdd-volume1-pve1 -wi-a----- 50.00g vm-103-disk-0 local-hdd-volume1-pve1 -wi-a----- 250.00g vm-104-disk-0 local-hdd-volume1-pve1 -wi-a----- 150.00g vm-108-disk-0 local-hdd-volume1-pve1 -wi-a----- 20.00g vm-109-disk-0 local-hdd-volume1-pve1 -wi-a----- 160.00g vm-110-disk-0 local-hdd-volume1-pve1 -wi-a----- 20.00g base-101-disk-0 pve Vri---tz-k 20.00g data base-105-disk-0 pve Vri---tz-k 15.00g data data pve twi---tz-- ../dm-2 lrwxrwxrwx 1 root root 7 Mar 29 17:35 pve-root -> ../dm-1 lrwxrwxrwx 1 root root 7 Mar 29 17:35 pve-swap -> ../dm-0 root@debian:/home/user# thin_dump --repair /dev/mapper/pve-data_tdata > repaired.xml The following field needs to be provided on the command line due to corruption in the superblock: transaction id root@debian:/home/user# thin_check /dev/mapper/pve-data_tdata examining superblock superblock is corrupt bad checksum in superblock, wanted 2018675394 however, I don’t know how to specify the transaction id and, most importantly, what id - where to find it