SSD's SMART Status not supported behind DELL PERC H730 Mini controller

I would like to output the temperature for each of my drives (NVME, SATA, SAS) in my Dell R630, but it couldn't show my SATA **Samsung SSD 870 EVO 250GB** (/dev/sdc)'s temperature, which is behind DELL PERC H730 Mini controller: hddtemp command shows: /dev/sda: SAMSUNG AREA7680S5xnNTRI: 37°C /dev/sdb: SAMSUNG AREA7680S5xnNTRI: 36°C /dev/sdc: DELL PERC H730 Mini: S.M.A.R.T. not available When I tried to use smartctl, it shows: Smartctl open device: /dev/sdc failed: DELL or MegaRaid controller, please try adding '-d megaraid,N' I then use smartctl -a -d megaraid,0 /dev/sdc It does shows my device name correctly: === START OF INFORMATION SECTION === Device Model: Samsung SSD 870 EVO 250GB and SMART support is: Available - device has SMART capability. SMART support is: Enabled but SMART status shows: === START OF READ SMART DATA SECTION === SMART Status not supported: ATA return descriptor not supported by controller firmware May I know how to find out the temperature of the SSD behind DELL PERC H730 Mini controller?