Sample Header Ad - 728x90

Unable to get USB Serial path/connection on Ubuntu

0 votes
1 answer
113 views
What I did so far. Activating the relevant driver & disabling Braille support - which seems to be often the root of the trouble. Reboot. sudo modprobe cp210x sudo apt remove brltty Confirming everything is in place: sudo lsmod | grep cp210x cp210x 36864 0 usbserial 49152 1 cp210x Plugging the device in. It is found: dmesg [ 130.776659] usbcore: registered new interface driver usbserial_generic [ 130.776672] usbserial: USB Serial support registered for generic [ 130.779299] usbcore: registered new interface driver cp210x [ 130.779324] usbserial: USB Serial support registered for cp210x [ 153.870560] usb 1-1.2: USB disconnect, device number 6 [ 169.708562] usb 1-1.2: new full-speed USB device number 7 using ehci-pci [ 169.819779] usb 1-1.2: New USB device found, idVendor=18ef, idProduct=e026, bcdDevice= 1.00 [ 169.819785] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 169.819788] usb 1-1.2: Product: EWD 100 [ 169.819790] usb 1-1.2: Manufacturer: Silicon Labs [ 169.819792] usb 1-1.2: SerialNumber: N0VNELCPLVW9SQVJ lsusb Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 005: ID 0a5c:21e6 Broadcom Corp. BCM20702 Bluetooth 4.0 [ThinkPad] Bus 001 Device 004: ID 147e:2020 Upek TouchChip Fingerprint Coprocessor (WBF advanced mode) Bus 001 Device 007: ID 18ef:e026 Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 003: ID 046d:c03e Logitech, Inc. Premium Optical Wheel Mouse (M-BT58) Bus 003 Device 002: ID 1ab1:0c94 Rigol Technologies Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub lsusb -d 18ef:e026 -v Bus 001 Device 005: ID 18ef:e026 Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x18ef idProduct 0xe026 bcdDevice 1.00 iManufacturer 1 Silicon Labs iProduct 2 EWD 100 iSerial 3 N0VNELCPLVW9SQVJ bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 32 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 100mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 2 EWD 100 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Device Status: 0x0000 (Bus Powered) However, nothing to be found at ls -al /dev | grep -i ttyUSB. Any ideas what further to check? I would highly appreciate it!
Asked by Nikolaij (103 rep)
Nov 20, 2024, 05:40 PM
Last activity: Nov 20, 2024, 11:51 PM