I have reinstalled Kubunutu 18.10 the previous week. After the reinstallation I cannot make my scanner work. I have a Brother DCP-9010CN scanner/printer on a network location.
I installed the driver and the printer works out of the box. The scanner has been found by
brscan-skey -l
, the result of this is:
DCP-9010CN : brother3:net1;dev0 : 192.168.0.43 Active
brsaneconfig3 -q
results in
Devices on network
0 DCP-9010CN "DCP-9010CN" I:192.168.0.43
During the installation the only error it gives is:
Packet 'ia32-libs' does not have a candidate for installation
Trying to find the scanner from SANE using scanimage -L
and sane-find-scanner
does not give any results. When I check on the scanner itself it finds my computer. But when I push from the device to my computer the computer starts the app but does not scan anything.
I cannot find anything wrong in this installation.
The driver install tool I used came from Brother themselves. The commands that I used for installing the drivers are:
sudo su
bash {untarred driver file} DCP-9010CN
On all the questions of the installer I answered 'Yes'. For selecting the source of the scanner/printer I selected the IP address and gave the correct IP to it.
The installed packages are:
dpkg -l | grep Brother
ii brother-udev-rule-type1 1.0.2 all Brother udev rule type 1
ii brscan-skey 0.2.4-1 amd64 Brother Linux scanner S-KEY tool
ii brscan3 0.2.13-1 amd64 Brother Scanner Driver
ii dcp9010cncupswrapper:i386 1.1.2-1 i386 Brother CUPS Inkjet Printer Definitions
ii dcp9010cnlpr:i386 1.1.2-1 i386 Brother lpr Inkjet Printer Definitions
dpkg --print-architecture
amd64
lscpu
Architectuur: x86_64
CPU-modus(sen): 32-bit, 64-bit
Bytevolgorde: Little Endian
CPU's: 4
Online CPU's-lijst: 0-3
Draden per kern: 1
Kernen per voet: 4
CPU-voeten: 1
NUMA-nodes: 1
Producent-ID: GenuineIntel
CPU-familie: 6
Model: 60
Modelnaam: Intel(R) Core(TM) i5-4670K CPU @ 3.40GHz
Stepping: 3
CPU-frequentie (MHz): 3351.143
max. CPU-frequentie (MHz): 3800,0000
min. CPU-frequentie (MHz): 800,0000
BogoMIPS: 6799.88
Virtualisatie: VT-x
L1d-cache: 32K
L1i-cache: 32K
L2-cache: 256K
L3-cache: 6144K
NUMA-node0 CPU('s): 0-3
Vlaggen: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc cpuid aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 sdbg fma cx16 xtpr pdcm pcid sse4_1 sse4_2 movbe popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm abm cpuid_fault epb invpcid_single pti ssbd ibrs ibpb stibp tpr_shadow vnmi flexpriority ept vpid fsgsbase tsc_adjust bmi1 avx2 smep bmi2 erms invpcid xsaveopt dtherm ida arat pln pts flush_l1d
Asked by JimmyD
(189 rep)
Jan 7, 2019, 05:15 PM
Last activity: Jul 4, 2023, 11:35 AM
Last activity: Jul 4, 2023, 11:35 AM