I using MacBook Air M1. When I run xrandr, output is: xrandr: Failed to get size of gamma for output default Screen 0: minimum 800 x 525, current 5760 x 1956, maximum 5760 x 1980 default connected 5760x1956+0+0 0mm x 0mm 800x600 60.00 840x525 60.00 1024x768 60.00 1152x720 60.00 1280x800 60.00 1440x900 60.00 1650x1050 60.00 2048x1280 60.00 2560x1600 60.00 5760x1956 1.00* 5760x1980 2.00 But I use 4 monitors - 3 x 1920x1080 and one retina 2560x1600 in below configuration How can I repair xrandr? XFreeRdp use xrandr to detect screens in multiscreen mode and this is some issue to run XFreeRdp session only on 2 or 3 screens.

This is a question in the continuation of this one: UTF8 filenames and shell utilities : the nightmare of utf-8 and filenames is…. How to avoid this confusion with most notably the ls command on filnames created in the following way: $ echo $LANG en_US.UTF-8 $ mkdir test $ cd test $ touch á $ touch a´ $ The first file is created by typing alt ⌥+E, A, the second one by typing A, alt ⌥+shift ⇧+E Within an xterm window I get: $ ls -al total 0 drwxr-xr-x 2 hal admin 136 Nov 11 15:52 . drwxr-x--- 7 hal admin 4386 Nov 11 14:25 .. -rw-r--r-- 1 hal admin 0 Nov 11 15:52 a´ -rw-r--r-- 1 hal admin 0 Nov 11 15:48 a´ $ Which is wrong. Within a Terminal window I get: $ ls -al total 0 drwxr-xr-x 2 hal admin 136 Nov 11 15:52 . drwxr-x--- 7 hal admin 4386 Nov 11 14:25 .. -rw-r--r-- 1 hal admin 0 Nov 11 15:52 a´ -rw-r--r-- 1 hal admin 0 Nov 11 15:48 á $ Which is right. The result is the same whichever shell I use: bash or zsh. What xterm or XQuartz setting will avoid these 2 filenames to falsely look the same? This problem doesn't exist on Mavericks (MacOS X 10.9).

macOS Catalina Version 10.15.5 I have downloaded XQuartz from following page (https://www.xquartz.org/) . The application installed and shown on the Utilities folder. When I open it, it is shown a second on the docker and always gone away (quits itself). It does not show up on the running applications, so I crashes due to some reason. I don't know how can I fix this issue, since I am not able to open the application. Is there any way can I fix this issue?

I'm running M1 Big Sur with Xquartz. For some reason, the background of all apps run with Xquartz is black (and it sometimes flickers). It seems that XQuartz is trying to help out by forcing a "Dark Mode". Why does that happen?

How to know which process or App is responsible for creating/managing a particular window in macOS? In my case I got really cryptic error message, in non modal free floating window. Using message found that it is from Sparkle framework, but I don't know which process or App cause it.

When attempting to use applications through XQuartz, such as PyCharm on a remote Linux machine via NoMachine, large numbers of background elements appear "black" on the screen, and if you screenshot them, you find that they are actually transparent. This can end up with a screen that looks like this: What can I do to get these applications rendering correctly?

I am on Monterey 12.7.6 with XQuartz 2.8.5 (xorg-server 21.1.6). At some point the Caps Lock toggles : With the light on it prints lower case. With the light off it prints uppercase. This happens in a xterm window. If I switch to a mac window, the caps lock corresponds to the light status. Only solution is restart XQuartz. I would like to know if there is an alternative solution, because I have a few windows open with ssh sessions to remote machines. Thanks, Regards

I am using a Macbook Pro (16-inch 2019, OSX 12.6.5) with X2go to connect to a remote Linux unit. When I connect my Macbook to a secondary display, using the "extended display mode", XQuartz opens an extremely wide window, which roughly covers the size of my two combined displays (main and extended). I am not able to re-size this XQuartz window, nor have I found any setting to put a limit to/regulate the dimensions. I have read this thread (https://apple.stackexchange.com/q/340555/499799) but apparently, I am not able to split the screen with another app because XQuartz immediately hides its window. Do you have hints/suggestions? Thank you very much!

After installing MacPorts and some software through that way, I noticed that MacPorts installed X.Org. I've already installed XQuartz years ago and I'm really fine with it. My 1. question is: Do I need the installed X.Org from MacPorts to run software like KeepNote or Gedit, which was installed automatically by MacPorts, or **am I free to uninstall X.Org** and leave XQuartz instead? My 2. question is: What about the other way round? Keeping the automatically installed X.Org and remove XQuartz? edit: changed the question and added a second one.

I'm on Ventura. I'm trying to log in to a remote Linux machine with X11 forwarding enabled. I followed these steps: 1. Install XQuartz (from the downloadable package on their website, not from brew). 2. Reboot my Mac 3. Enable "allow connections from network clients" in XQuartz 4. Ensure X11 forwarding is enabled in the remote's sshd_config and restart remote sshd 5. Disable the firewall on my Mac 6. ssh -X user@remote from the terminal within XQuartz 7. Confirm that the DISPLAY env var is set on the remote 8. xterm on the remote And nothing happens; xterm just freezes. There are no error messages, but also no windows appear. I've also tried: - Enabling/disabling "authenticate connections" in XQuartz - ssh -Y instead of ssh -X - Manually setting the remote DISPLAY variable to my_ip_address:0 - Waiting for a few minutes after running xterm just in case I was being impatient But all have the same effect: running xterm just hangs with no errors. What else can I try?

I have XQuartz running and I can open xterm if I have started XQuartz just for the first time after rebooting the machine. However, as time passes, I cannot create new xterms. So much so that if I quit current XQuartz and restart just XQuartz, I cannot get any xterm. It is annoying that I have to reboot the machine just to be able to use xterm. I am running OS X 10.11 El Capitan. I'll appreciate any insight. Here is the information from pkgutil. $ pkgutil --file-info /Applications/Utilities/XQuartz.app volume: / path: /Applications/Utilities/XQuartz.app pkgid: org.macosforge.xquartz.pkg pkg-version: 2.7.86 install-time: 1445273913 uid: 0 gid: 0 mode: 755

For macOS (High Sierra) Inkscape can be installed via MacPorts with two options: +Quartz or +X11. What is the difference? Which version is (more) recommended?

I have currently an issue about trying to get a SSH X forwarding connection from a macOS Ventura to a Debian Linux 11. I am using XQuartz 2.8.4 (2.8.5 failed in installation). I don't know where the problem comes from. Below a lot of informations with -vvv option : ssh -X -vvv fab@pablo OpenSSH_9.0p1, LibreSSL 3.3.6 debug1: Reading configuration data /etc/ssh/ssh_config debug1: /etc/ssh/ssh_config line 21: include /etc/ssh/ssh_config.d/* matched no files debug1: /etc/ssh/ssh_config line 54: Applying options for * debug1: /etc/ssh/ssh_config line 58: Applying options for * debug3: expanded UserKnownHostsFile '~/.ssh/known_hosts' -> '/Users/fab/.ssh/known_hosts' debug3: expanded UserKnownHostsFile '~/.ssh/known_hosts2' -> '/Users/fab/.ssh/known_hosts2' debug1: Authenticator provider $SSH_SK_PROVIDER did not resolve; disabling debug1: Connecting to pablo port 22. debug1: Connection established. debug1: identity file /Users/fab/.ssh/id_rsa type -1 debug1: identity file /Users/fab/.ssh/id_rsa-cert type -1 debug1: identity file /Users/fab/.ssh/id_ecdsa type -1 debug1: identity file /Users/fab/.ssh/id_ecdsa-cert type -1 debug1: identity file /Users/fab/.ssh/id_ecdsa_sk type -1 debug1: identity file /Users/fab/.ssh/id_ecdsa_sk-cert type -1 debug1: identity file /Users/fab/.ssh/id_ed25519 type -1 debug1: identity file /Users/fab/.ssh/id_ed25519-cert type -1 debug1: identity file /Users/fab/.ssh/id_ed25519_sk type -1 debug1: identity file /Users/fab/.ssh/id_ed25519_sk-cert type -1 debug1: identity file /Users/fab/.ssh/id_xmss type -1 debug1: identity file /Users/fab/.ssh/id_xmss-cert type -1 debug1: identity file /Users/fab/.ssh/id_dsa type -1 debug1: identity file /Users/fab/.ssh/id_dsa-cert type -1 debug1: Local version string SSH-2.0-OpenSSH_9.0 debug1: Remote protocol version 2.0, remote software version OpenSSH_8.4p1 Debian-5+deb11u1 debug1: compat_banner: match: OpenSSH_8.4p1 Debian-5+deb11u1 pat OpenSSH* compat 0x04000000 debug3: fd 5 is O_NONBLOCK debug1: Authenticating to pablo:22 as 'fab' debug3: record_hostkey: found key type ED25519 in file /Users/fab/.ssh/known_hosts:1 debug3: record_hostkey: found key type ECDSA in file /Users/fab/.ssh/known_hosts:2 debug3: load_hostkeys_file: loaded 2 keys from pablo debug1: load_hostkeys: fopen /Users/fab/.ssh/known_hosts2: No such file or directory debug1: load_hostkeys: fopen /etc/ssh/ssh_known_hosts: No such file or directory debug1: load_hostkeys: fopen /etc/ssh/ssh_known_hosts2: No such file or directory debug3: order_hostkeyalgs: have matching best-preference key type ssh-ed25519-cert-v01@openssh.com, using HostkeyAlgorithms verbatim debug3: send packet: type 20 debug1: SSH2_MSG_KEXINIT sent debug3: receive packet: type 20 debug1: SSH2_MSG_KEXINIT received debug2: local client KEXINIT proposal debug2: KEX algorithms: sntrup761x25519-sha512@openssh.com,curve25519-sha256,curve25519-sha256@libssh.org,ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,diffie-hellman-group-exchange-sha256,diffie-hellman-group16-sha512,diffie-hellman-group18-sha512,diffie-hellman-group14-sha256,ext-info-c debug2: host key algorithms: ssh-ed25519-cert-v01@openssh.com,ecdsa-sha2-nistp256-cert-v01@openssh.com,ecdsa-sha2-nistp384-cert-v01@openssh.com,ecdsa-sha2-nistp521-cert-v01@openssh.com,rsa-sha2-512-cert-v01@openssh.com,rsa-sha2-256-cert-v01@openssh.com,ssh-ed25519,ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521,rsa-sha2-512,rsa-sha2-256 debug2: ciphers ctos: chacha20-poly1305@openssh.com,aes128-ctr,aes192-ctr,aes256-ctr,aes128-gcm@openssh.com,aes256-gcm@openssh.com debug2: ciphers stoc: chacha20-poly1305@openssh.com,aes128-ctr,aes192-ctr,aes256-ctr,aes128-gcm@openssh.com,aes256-gcm@openssh.com debug2: MACs ctos: umac-64-etm@openssh.com,umac-128-etm@openssh.com,hmac-sha2-256-etm@openssh.com,hmac-sha2-512-etm@openssh.com,hmac-sha1-etm@openssh.com,umac-64@openssh.com,umac-128@openssh.com,hmac-sha2-256,hmac-sha2-512,hmac-sha1 debug2: MACs stoc: umac-64-etm@openssh.com,umac-128-etm@openssh.com,hmac-sha2-256-etm@openssh.com,hmac-sha2-512-etm@openssh.com,hmac-sha1-etm@openssh.com,umac-64@openssh.com,umac-128@openssh.com,hmac-sha2-256,hmac-sha2-512,hmac-sha1 debug2: compression ctos: none,zlib@openssh.com,zlib debug2: compression stoc: none,zlib@openssh.com,zlib debug2: languages ctos: debug2: languages stoc: debug2: first_kex_follows 0 debug2: reserved 0 debug2: peer server KEXINIT proposal debug2: KEX algorithms: curve25519-sha256,curve25519-sha256@libssh.org,ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,diffie-hellman-group-exchange-sha256,diffie-hellman-group16-sha512,diffie-hellman-group18-sha512,diffie-hellman-group14-sha256 debug2: host key algorithms: rsa-sha2-512,rsa-sha2-256,ssh-rsa,ecdsa-sha2-nistp256,ssh-ed25519 debug2: ciphers ctos: chacha20-poly1305@openssh.com,aes128-ctr,aes192-ctr,aes256-ctr,aes128-gcm@openssh.com,aes256-gcm@openssh.com debug2: ciphers stoc: chacha20-poly1305@openssh.com,aes128-ctr,aes192-ctr,aes256-ctr,aes128-gcm@openssh.com,aes256-gcm@openssh.com debug2: MACs ctos: umac-64-etm@openssh.com,umac-128-etm@openssh.com,hmac-sha2-256-etm@openssh.com,hmac-sha2-512-etm@openssh.com,hmac-sha1-etm@openssh.com,umac-64@openssh.com,umac-128@openssh.com,hmac-sha2-256,hmac-sha2-512,hmac-sha1 debug2: MACs stoc: umac-64-etm@openssh.com,umac-128-etm@openssh.com,hmac-sha2-256-etm@openssh.com,hmac-sha2-512-etm@openssh.com,hmac-sha1-etm@openssh.com,umac-64@openssh.com,umac-128@openssh.com,hmac-sha2-256,hmac-sha2-512,hmac-sha1 debug2: compression ctos: none,zlib@openssh.com debug2: compression stoc: none,zlib@openssh.com debug2: languages ctos: debug2: languages stoc: debug2: first_kex_follows 0 debug2: reserved 0 debug1: kex: algorithm: curve25519-sha256 debug1: kex: host key algorithm: ssh-ed25519 debug1: kex: server->client cipher: chacha20-poly1305@openssh.com MAC: compression: none debug1: kex: client->server cipher: chacha20-poly1305@openssh.com MAC: compression: none debug3: send packet: type 30 debug1: expecting SSH2_MSG_KEX_ECDH_REPLY debug3: receive packet: type 31 debug1: SSH2_MSG_KEX_ECDH_REPLY received debug1: Server host key: ssh-ed25519 SHA256:GLFoF6k2v/2MxuWrF1yK62AkZHsxKjH15LdXOC8PNIY debug3: record_hostkey: found key type ED25519 in file /Users/fab/.ssh/known_hosts:1 debug3: record_hostkey: found key type ECDSA in file /Users/fab/.ssh/known_hosts:2 debug3: load_hostkeys_file: loaded 2 keys from pablo debug1: load_hostkeys: fopen /Users/fab/.ssh/known_hosts2: No such file or directory debug1: load_hostkeys: fopen /etc/ssh/ssh_known_hosts: No such file or directory debug1: load_hostkeys: fopen /etc/ssh/ssh_known_hosts2: No such file or directory debug1: Host 'pablo' is known and matches the ED25519 host key. debug1: Found key in /Users/fab/.ssh/known_hosts:1 debug3: send packet: type 21 debug2: ssh_set_newkeys: mode 1 debug1: rekey out after 134217728 blocks debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug3: receive packet: type 21 debug1: SSH2_MSG_NEWKEYS received debug2: ssh_set_newkeys: mode 0 debug1: rekey in after 134217728 blocks debug1: get_agent_identities: bound agent to hostkey debug1: get_agent_identities: ssh_fetch_identitylist: agent contains no identities debug1: Will attempt key: /Users/fab/.ssh/id_rsa debug1: Will attempt key: /Users/fab/.ssh/id_ecdsa debug1: Will attempt key: /Users/fab/.ssh/id_ecdsa_sk debug1: Will attempt key: /Users/fab/.ssh/id_ed25519 debug1: Will attempt key: /Users/fab/.ssh/id_ed25519_sk debug1: Will attempt key: /Users/fab/.ssh/id_xmss debug1: Will attempt key: /Users/fab/.ssh/id_dsa debug2: pubkey_prepare: done debug3: send packet: type 5 debug3: receive packet: type 7 debug1: SSH2_MSG_EXT_INFO received debug1: kex_input_ext_info: server-sig-algs= debug3: receive packet: type 6 debug2: service_accept: ssh-userauth debug1: SSH2_MSG_SERVICE_ACCEPT received debug3: send packet: type 50 debug3: receive packet: type 51 debug1: Authentications that can continue: publickey,password debug3: start over, passed a different list publickey,password debug3: preferred publickey,keyboard-interactive,password debug3: authmethod_lookup publickey debug3: remaining preferred: keyboard-interactive,password debug3: authmethod_is_enabled publickey debug1: Next authentication method: publickey debug1: Trying private key: /Users/fab/.ssh/id_rsa debug3: no such identity: /Users/fab/.ssh/id_rsa: No such file or directory debug1: Trying private key: /Users/fab/.ssh/id_ecdsa debug3: no such identity: /Users/fab/.ssh/id_ecdsa: No such file or directory debug1: Trying private key: /Users/fab/.ssh/id_ecdsa_sk debug3: no such identity: /Users/fab/.ssh/id_ecdsa_sk: No such file or directory debug1: Trying private key: /Users/fab/.ssh/id_ed25519 debug3: no such identity: /Users/fab/.ssh/id_ed25519: No such file or directory debug1: Trying private key: /Users/fab/.ssh/id_ed25519_sk debug3: no such identity: /Users/fab/.ssh/id_ed25519_sk: No such file or directory debug1: Trying private key: /Users/fab/.ssh/id_xmss debug3: no such identity: /Users/fab/.ssh/id_xmss: No such file or directory debug1: Trying private key: /Users/fab/.ssh/id_dsa debug3: no such identity: /Users/fab/.ssh/id_dsa: No such file or directory debug2: we did not send a packet, disable method debug3: authmethod_lookup password debug3: remaining preferred: ,password debug3: authmethod_is_enabled password debug1: Next authentication method: password fab@pablo's password: debug3: send packet: type 50 debug2: we sent a password packet, wait for reply debug3: receive packet: type 52 Authenticated to pablo ([192.168.1.62]:22) using "password". debug1: channel 0: new [client-session] debug3: ssh_session2_open: channel_new: 0 debug2: channel 0: send open debug3: send packet: type 90 debug1: Requesting no-more-sessions@openssh.com debug3: send packet: type 80 debug1: Entering interactive session. debug1: pledge: exec debug3: receive packet: type 80 debug1: client_input_global_request: rtype hostkeys-00@openssh.com want_reply 0 debug3: client_input_hostkeys: received RSA key SHA256:/qSKL8wq3JtHIJiXzu+62UH3nbjm+fObXjBofpoqPyo debug3: client_input_hostkeys: received ECDSA key SHA256:76LnGQ12/LisJhH5vvrWgCdn2I/oxOzhcuLnO9+6LYQ debug3: client_input_hostkeys: received ED25519 key SHA256:GLFoF6k2v/2MxuWrF1yK62AkZHsxKjH15LdXOC8PNIY debug1: client_input_hostkeys: searching /Users/fab/.ssh/known_hosts for pablo / (none) debug3: hostkeys_foreach: reading file "/Users/fab/.ssh/known_hosts" debug3: hostkeys_find: found ssh-ed25519 key at /Users/fab/.ssh/known_hosts:1 debug3: hostkeys_find: found ecdsa-sha2-nistp256 key at /Users/fab/.ssh/known_hosts:2 debug1: client_input_hostkeys: searching /Users/fab/.ssh/known_hosts2 for pablo / (none) debug1: client_input_hostkeys: hostkeys file /Users/fab/.ssh/known_hosts2 does not exist debug3: client_input_hostkeys: 3 server keys: 1 new, 1 retained, 1 incomplete match. 0 to remove debug3: client_input_hostkeys: asking server to prove ownership for 1 keys debug3: send packet: type 80 debug3: receive packet: type 91 debug2: channel_input_open_confirmation: channel 0: callback start debug2: client_x11_get_proto: xauth command: /opt/X11/bin/xauth -f /var/folders/1n/6wz8wzkn63n8y1zc2xjcm6640000gn/T//ssh-Tw35M0laihwY/xauthfile generate /private/tmp/com.apple.launchd.qpHhyhgMf3/org.xquartz:0 MIT-MAGIC-COOKIE-1 untrusted timeout 1260 2>/dev/null It seems that XQuartz doesn't open the X after typing the password, I don't understand. If someone has already got this type of issue or sees its cause, I am lost with these many log informations ... **UPDATE 1 :** Here an example (where I have deleted the known_hosts on both side) : $ ssh -Y fab@pablo The authenticity of host 'pablo (192.168.1.62)' can't be established. ED25519 key fingerprint is SHA256:GLFoF6k2v/2MxuWrF1yK62AkZHsxKjH15LdXOC8PNIY. This key is not known by any other names Are you sure you want to continue connecting (yes/no/[fingerprint])? yes Warning: Permanently added 'pablo' (ED25519) to the list of known hosts. fab@pablo's password: Linux pablo 5.10.0-23-amd64 #1 SMP Debian 5.10.179-2 (2023-07-14) x86_64 The programs included with the Debian GNU/Linux system are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyright. Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. Last login: Wed Aug 2 01:17:43 2023 from 192.168.1.66 and doesn't display the rest. **UPDATE 2 :** I keep on my investigations about my issue. I found out that if I set on remote the environment variable to DISPLAY=localhost:10.0, then the X of server is working ( after a ssh -Y fab@pablo ) : I mean, I can launch for example nedit from remote machine and the window will appear on my macOS Ventura. I realized there is a code snippet into the ~/.zshrc of current user on remote machine : ############ FOR X11 Fowarding ############## if [ -e "$DISPLAY" ]; then DISPDIR=$(dirname $DISPLAY) NEWDISP="${DISPDIR}/:0" if [ ! -e "$NEWDISP" ]; then ln -s "$DISPLAY" "$NEWDISP" xauth -q generate "$NEWDISP" . fi export DISPLAY="$NEWDISP" fi but I don't remember what this part does exactly. Ideally, I would like that ssh connextion puts automatically the right value for variable DISPLAY : either directly on the machine (127.0.0.1:0.0) and from the macOS (127.0.0.1:10) when I do a ssh -X fab@pablo.

XQuartz was always the goto for running X applications on a MacOS desktop. It's been a couple of years since the last version of Quartz and there is no activity on the github, so we may assume that the XQuartz project is dead. Are there any alternatives for running X application on a MacOS desktop?

In a clean rebuild of Ventura, my default shell is

/bin/zsh

. For instance, that is what shows up in a Terminal.app terminal. If I start an xterm (launched from XQuartz 2.8.4), the shell shown in

$SHELL

is

/bin/sh

(& in other tests, see Comments). The xterm should be using my default shell, but can't seem to make that happen. I did notice that

read org.xquartz.X11 login_shell

shows

/bin/sh

. However, I changed that to zsh with a

write

, restarted the computer, and there was no change in behavior. Edit, more info: Setting the XQuartz app_to_run parameter to

$0

reports

-zsh

, but setting app_to_run to

produces an xterm running

. I'm so confused. Edit, even more info: I've pushed the problem back to the XQuartz starting context. The problem only occurs if XQuartz is started as a Login item, or if it is started with a launcher (I use Quicksilver) which itself was a Login item. So it appears that Mac Login items are not using the default shell. Can anyone else replicate?

Since I updated to macOS 13 Ventura, whenever I try to switch to XQuartz I have to switch twice for it to show me the window. The first time I click the icon or do Cmd+Tab to the window, the window seems open - in fact, Cmd+Tab shows XQuartz as the first program, but the XQuartz window is still behind the rest of my windows. It never did this before updating. Is this a known problem and if it is, is there some way of fixing it? Update: I uninstalled and reinstalled XQuartz using homebrew but it still gives me the same problem. Update 2: I updated XQuartz to version 2.8.4, but I'm still having the same problem

With Pop!_OS's tiling window manager (found here: https://github.com/pop-os/tiler) , I can use my mouse instead of the keyboard to tile the windows. I find it easier than complex keyboard combinations. Is there anything similar in macOS? Or can I configure Amethyst or yabai to use the mouse? If all else fails, can I compile this tiler for XQuartz?

Whenever I use ssh, after I type the password, xQuartz pop ups in the dock and terminal window looses focus. This happens even if there's no an X session. Why? How to prevent this behavior?

## Problem Device and OS version: MacBook Pro 2021 Apple Silicon 13.0.1 (22A400) The remote server can't forward open3d window to my Mac the codes are as follows:

import copy
import numpy as np
import open3d as o3d

if __name__ == "__main__":

    print("Testing mesh in open3d ...")
    mesh = o3d.io.read_triangle_mesh("a.obj")
    print(mesh)
    print(np.asarray(mesh.vertices))
    print(np.asarray(mesh.triangles))
    verts = np.asarray(mesh.vertices)
   
    mesh.vertices = o3d.utility.Vector3dVector(verts)
    mesh.compute_vertex_normals()
    mesh.paint_uniform_color([0.6, 0.1, 0.5])

    cords = o3d.geometry.TriangleMesh.create_coordinate_frame()
    o3d.visualization.draw_geometries([mesh])

note that a.obj is a testfile for helping test X11 Forwarding the raised error is:

libGL error: No matching fbConfigs or visuals found
libGL error: failed to load driver: swrast
[Open3D WARNING] GLFW Error: GLX: Forward compatibility requested but GLX_ARB_create_context_profile is unavailable
[Open3D WARNING] Failed to create window
[Open3D WARNING] [DrawGeometries] Failed creating OpenGL window.

## Background I have added the following two lines in my ssh configuration file on Mac

ForwardX11 yes
ForwardX11Trusted yes

and added the following command in my .bashrc file on Mac

export DISPLAY=:0

I'm using XQuartz 2.8.4 to receive remote GUI, and I can display the clock on my Mac by using xclock on the remote server terminal normally # What I Want I asked others, I know that **mobaxterm** can display open3d window normally, but it's a windows software, and Mac can only use **XQuartz** to display GUI of the remote server. so how can I display the open3d window on Mac by XQuartz?

I use WingIDE for Python development and it runs under X Windows. The X11 font rendering is driving me crazy. Are there any tricks for getting better fonts in an X Server on MacOS / Lion? Sample image here . It's not so bad that I'd say it's broken, but the hinting, subpixel rendering, etc all just doesn't look nearly as nice in the X server as it does in MacOS native. I've installed XQuartz 2.7.0 binaries by hand and didn't notice any improvement in font rendering. I also tried copying Menlo.ttc into my ~/.fonts directory to have a nicer font than the X windows fonts but it's clear the X font renderer just can't match MacOS native. This 2005 OpenOffice tips article recommends replacing libfreetype but it's a pretty awkward process I haven't tried given the age of the instructions.