I have tried to access the voice command on the Talkback menu. I have tried to use adb/fastboot. All o no avail Outlast 5g

I have an old (unlocked, I think) Alcatel AT&T-branded phone that I have not used for years. I charged it up and reset it to factory with the Vol-Down + Start and booted. I was greeted with "This phone is connected to an existing email account". I entered the account ...@gmail.com and Google asked for the last password I remembered. I added that in, yes, still had it. After about a minute, it came back with "That email account has been deleted and we need more information." But it does not say what or how to continue. I never deleted that account and actually have never used the email. I had to create a Google account years back when I got the phone. I do not have any other Google (and never will) account, so they seem to own MY phone. How can I get this working?

For my Motorola xt2271dl . I'm unable to install files once downloaded on Chrome browser so I can't get past that

I'm dealing with a very lengthy and drawn-out FRP bypass. This Samsung Galaxy A54 (A546V), which is on Android 13, refuses to let me bypass it, and I literally have done everything except for modding the firmware. If I can mod and root the device, I know I can get in and remove the FRP lock within the CM. If anyone can point me in the direction of where I will find a way to root, and/or help me mod the phone firmware. I am pretty sure I have exhausted all of the methods and options available to bypass FRP.

I have A546U Galaxy SM-A546U. It is frp locked so I am trying to figure out the easiest way to get around frp , I've recently half bricked the phone all ready using odin3 , after a week of staying at it got the phone back to normal frp lock . Anyone please be kind enough to help me ? Ty

It won't let me use Google assistant through talkback or edit the emergency information.

I have some A13's I am trying to get into. They are company phones and their previous users have left the business but with pin codes and accounts still on their company phones. I am trying to get around FRP so I can reset these phones and put them to good use. What I have tried so far - Using DroidKit, however it won't recognise the phone as USB debugging on turned off (and unable to turn it on as settings hidden behind passcode) - Flashing stock firmware on to the device (Still hit the same FRP problem) Has any got any suggestions or advice? Thanks

I have a a136u 5g phone I forgot my pin code and no access to account associated I need help with frp bypass. Nothing is working. None of the exploits I see online work. In talkback instead of talking back it says stop. I really need I. This phone it's all I have tyia

|Model|SM-S916W| |:----|:------| |CSC version|S916WOYV4CXI4| |Firmware| https://samfw.com/firmware/SM-S916W/XAC| |FRP status|TRIGGERED| |ADB status|Sideload| |Wifi/SIM|connected/yes| |Country|CA| |Recovery|samsung/dm2qcsx/dm2q
13/TP1A.220624.014/S916WVLS4CXI4
user/release-keys| |USB Debugging|Disabled| |Bootloader|Locked| There is no option to unlock bootloader from the download mode and Reboot to bootloader from recovery mode does not work either. Options I already tried:​ - SamFw Tool 4.9: - Remove FRP (USA models 2024) - Remove FRP (security from August 2022 to December 2022) - Remove FRP (security older than August 2022) - MTP> KG Unlock (Untested): brought up AT Command but i couldn't understand and didn't go past that point - Download Mode> FRP Android 5/6 both method. - android > FRP > Remove FRP, Open Browser - android > FRP > App Manager > tried installing app-debug.apk - Odin 3.14: - Flashed latest stock firmware - tried flashing TWRP dm2q and vbmeta but failed. - Accessibility talk back and emergency call codes - talk back menu's only options: - read from next item - copy last spoken phrase - spoken language - screen search - hide screen - describe image - Emergency call codes are useless. I haven't tried combination firmware option because I could not find the combination firmware for this model. Please tell me what next steps should I take and what other information/logs should I provide? Is there any ADB sideload exploits available that could work? Is it even possible to remove/bypass FRP lock from newer models like S23 plus?

I lost my Samsung Galaxy A22 (SM-A225F/DS) and got it back from the police who found it and returned it to me. The problem that I encountered was that my phone was locked when I received it, so I decided to reset it. I already reset it, and I encountered another problem when I'm doing a setup because it need the Google account for the verification, but when I enter my Google account that I used in my lost phone here, it is changed to the Google account of the one who stole it. Therefore, I cannot complete the setup to my phone because of that, and instead of using the Google account, it needed the pattern unlock to unlock it, but I don't know the pattern of it. So I'm here to seek help.

I can't get into my Motorola Moto G after a factory reset. It is number code screen-locked and Google-locked. I've tried using the emergency call from the start screen already. I'm looking for help using a USB and tablet to get into my phone. I am open to any way to do it too.

I won a Samsung Galaxy S6 Edge, signed into it with my Google account, played around with it, wiped it, and sold it. Now the person can't get past setup because it's saying he must log in with an account previously synced to the phone. Is there anything I can do from my side to remove this lock?

I have Samsung Galaxy J7 Prime (SM-G610F). Because I only have 16 GB internal storage and the system takes 5 GB of space, I wanted to root my phone to remove pre-installed apps which were unimportant. Now, rooting requires the phone to be in download mode. The way you get into the Download mode is by Volume Down + Home + Power buttons, but **my Home button is faulty and doesn't work**, so I used ADB to enter Download mode. I used Odin to root my phone. While it was being rooted, there were a few disconnects from the PC. After rooting, I configured and set all the things and downloaded some important apps. Then I restarted my phone because of a few updates (personalizations). Now it is stuck at the "FRP Lock Screen" and when I hold the Power button, the phone does not boot. The error message it displays is: > Custom binary blocked by FRP lock I searched on the internet for how to get out of it. I think we need to get to Recovery mode to factory reset or unroot? Usually, we can enter Recovery mode or download mode to fix FRP Lock (Factory reset or Unroot). But my Home button doesn't work on the phone, so I am not able to enter Download mode (Volume Down + Home button + Power button) or Recovery mode (Volume up + Home button + Power Button). I also didn't turn on Developer Options before restarting the phone, so Unlock OEM and USB debugging is off. And that's a bad thing because I could have used ADB from my computer to fix the problem. I also reset the phone three times before this problem and logged into the same Google account after each reset. Is it possible to bring my phone back to life or is it dead? --- *Please let me know only if I can fix this problem without spending any money. Something I could do to fix the problem and not buy anything. If there is no solution, then you can answer "NO" also.*

a known, 90 years old, has forgotten PIN and Google account. He still has a bill. Even if the device is already about 4 years old, he would like to use it. How can he unlock tablet. Is that possible without much effort? > Verify Account - > Log in with your Google account > > This device was reset. To proceed, log in with the Google account that was previously synced with this device.

I [rooted a new Fairphone 5 using Magisk](https://xdaforums.com/t/rooting-fp5.4634181/post-89111662) . After rooting I wanted to run the setup wizard again so I used

adb shell
su
pm enable com.google.android.setupwizard/com.google.android.setupwizard.SetupWizardActivity
exit
exit
adb shell settings put secure user_setup_complete 0
adb reboot

At some point in the rooting and setting up process I must have triggered FRP because now I cannot install APKs outside of the Play store because of FRP. I get the error

Can't install packages while in secure FRP

I can still install APKs with

. I can temporarily fix the problem using

adb shell settings put secure secure_frp_mode 0

Otherwise I have full access to my phone and I have not had basic access to phone blocked by a "verify my google account" dialog like so many people having FRP issues. There are quite a few discussions at [android.stackexchange.com](https://android.stackexchange.com) about dealign with FRP problems, some with answers. Some of the answers seem device specific but none deal with Fairphone 5. Is there a device-neutral way to fix this FRP issue? I have moved data and apps over to this new phone from my old phone so I would prefer to not have to do a factory reset to fix this issue.

On the most recent update on the EFT Pro Tool (4.6.3), there are no options for the Samsung Galaxy A54. I thought I had come across a YouTube video of someone FRP unlocking an A54 with EFT, but I cannot find the video anymore. If there is a version of EFT Pro Tool that has options for the Galaxy A54, what is it? I also am curious to know if the "Oppo A54" is the same thing. I have full registration on EFT Pro and would love it if I could get this Galaxy A54 unlocked without paying for a new program.

I have tried to reset my phone as was given by elder whom the owner is past of which the owner details are not know and I stacked on How to bypass “Verify your account” (Factory Reset Protection) on Nokia 5

I pulled out a Samsung Galaxy S6 that has not been used in a while. **It has never been rooted or had custom software**, and it was working last time. But now it was not starting up, it got stuck at the boot animation with blinking Samsung logo. When booting in recovery mode, it said "dm-verity error", which indicates corrupt system files. I do not care about the contents, I am okay with wiping the phone. I booted in download mode and tried flashing the original software with Odin 3.14 on a Windows 10 computer. This phone is SM-G920F from Vodafone Italy. [I downloaded the newest software from SamMobile, G920FXXU6EVG1.](https://www.sammobile.com/samsung/galaxy-s6/firmware/SM-G920F/OMN/download/G920FXXU6EVG1/1676670/) Odin failed while transferring system.img and now the phone only starts up to a screen saying "An error has occurred while updating the device software. Use the Emergency recovery function in the Smart Switch PC software." Download mode works, but recovery mode does not. I downloaded and installed Smart Switch and tried the emergency recovery initialization. It stops, saying "This model does not support firmware upgrades and initialization." Trying to flash the software with Odin again fails at sboot.bin. With re-partition option enabled, it says Can't open the specified file (Line: 2006). With erase nand option enabled, it fails at Erase... All fails occur almost instantly. This phone has re-activation lock enabled, so flashing a custom recovery like TWRP also fails (I do not mind tripping Knox), with error "Custom Recovery Blocked By R/L". **I know the Google and Samsung account credentials** to remove the lock, but the phone needs to start up to enter them! Other things attempted in vain: * Re-installing drivers from Smart Switch * Older version of Odin (3.10) * Older version of Windows (7) * Different USB cable (works fine with other devices) * Different USB port (2.0) * Rebooting the phone between each attempt * The older software that phone was running (G920FXXU6ERF5) * The software with four files (BL, AP, CP, CSC instead of just AP) * Extracting the .pit file from the CSC file and adding it to the Pit tab in Odin * Flashing only recovery.img (extracted from the .tar.md5 file and put into a new .tar file and added to AP) * The generic Italian software (ITV instead of OMN) I even tried hijacking R/L with Hagard's tool, which claims to succeed, but the lock is still on. The only way to shut the phone off is by letting the battery run out or disconnecting it. How can the original software be flashed to this phone to get it to start up again, with or without data? Please help.

I recently inherited a Moto G Play (2021) from a family member who quit using it a while back. I factory reset it using the BIOS (hold volume up + power), but when going through the setup again, it's asking for the previous PIN on the phone. My relative doesn't remember it anymore, and they've since deleted the Google account that used to be associated as well. Is there a way I can use the phone again? I'm okay with custom ROMs and such, and I actually don't even need to activate the cell service, WiFi only would be fine.

I have a new Galaxy S9+ that was setup before a vacation. When I returned, my code did not work. I did not link the google account to a phone, nor do I remember the one used during setup. I've done a factory reset and now I'm being required to enter password or use a Google account. I can do neither. I've attempted to use the apk after the reset, but the tablet does not see the usb device. File manager does not open when I plug it in. Is there any way to factory reset this? Samsung support is horrible so far.