My Android device is 3G capable, but does not have a front-facing camera. I am on a 3G network and I don't see any "video call" option in contacts. I'm wondering if I will be able to receive video calls so that I can just see them or maybe show my primary camera (back of the phone; the only camera) to them? Also, if that was possible, can I toggle the camera off/on DURING the 3g call? And does "data packet" need to be enabled to receive 3G calls? EDIT: My device is Huawei IDEOS u8150 running Android 2.2 and if 3G video calls are not supported, can I find some custom ROM suitable for mine that can do this with the existing camera or some other workaround?

Is there an app which can record audio (to mp3) from the FM radio (**NOT** internet-radio). I want to record some shows while listening to the radio and store them in my SD memory card but I can't seem to find any suitable application. My phone is a Huawei U8150 and I'm using Android 2.1.

While I know Android phones play mp4 the best, I wanted to know what other specification in this container is the best for playback, (the bitrate, resolution, fps etc). Or perhaps some other codec/format that Android can (or is designed to) play smoothly and with an acceptable file size/quality ratio? I searched the Android developer page and tried the H.264 setting on my converter etc, but the file fails to play natively on my handset and when I tried to open it using RockPlayer. It plays slowly and the video-audio gets out of sync progressively. I tried many external players. However, 3GP videos from my Nokia phones play smoothly (even natively). **So I want to know what is ideal for my low end phone (video should be normal quality and size)?** My phone is a Huawei IDEOS U8150 running Froyo with a 320x240 resolution and a 528 Mhz ARMv6 processor. Also if anyone has tips, what types of encoding is recommended, if I'd be using the software decoder mode in apps like RockPlayer, so I can achieve more file size compression yet achieve smooth playback?

I have a Huawei comet u8150 That I decided to root seeing as I'm stuck with it for the time being. I rooted it last night, Flashed Clockwork Mod Recovery 5.0.2 and Installed CyanogenMod 7 for the U8150. Now before I installed Cyanogen I was able to access the device via adb using sudo -s and starting the server via a root shell. Now I can run it as sudo or a root shell and I get the same issue. Inside of 51-android.rules I have SUBSYSTEM=="usb", ATTRS{idVendor}=="0bb4", MODE="0666" SUBSYSTEM=="usb", ATTRS{idVendor}=="0e79", MODE="0666" SUBSYSTEM=="usb", ATTRS{idVendor}=="0502", MODE="0666" SUBSYSTEM=="usb", ATTRS{idVendor}=="0b05", MODE="0666" SUBSYSTEM=="usb", ATTRS{idVendor}=="413c", MODE="0666" SUBSYSTEM=="usb", ATTRS{idVendor}=="0489", MODE="0666" SUBSYSTEM=="usb", ATTRS{idVendor}=="091e", MODE="0666" SUBSYSTEM=="usb", ATTRS{idVendor}=="18d1", MODE="0666" SUBSYSTEM=="usb", ATTRS{idVendor}=="0bb4", MODE="0666" SUBSYSTEM=="usb", ATTRS{idVendor}=="12d1", MODE="0666" SUBSYSTEM=="usb", ATTRS{idVendor}=="24e3", MODE="0666" SUBSYSTEM=="usb", ATTRS{idVendor}=="2116", MODE="0666" SUBSYSTEM=="usb", ATTRS{idVendor}=="0482", MODE="0666" SUBSYSTEM=="usb", ATTRS{idVendor}=="17ef", MODE="0666" SUBSYSTEM=="usb", ATTRS{idVendor}=="1004", MODE="0666" SUBSYSTEM=="usb", ATTRS{idVendor}=="22b8", MODE="0666" SUBSYSTEM=="usb", ATTRS{idVendor}=="0409", MODE="0666" SUBSYSTEM=="usb", ATTRS{idVendor}=="2080", MODE="0666" SUBSYSTEM=="usb", ATTRS{idVendor}=="0955", MODE="0666" SUBSYSTEM=="usb", ATTRS{idVendor}=="2257", MODE="0666" SUBSYSTEM=="usb", ATTRS{idVendor}=="10a9", MODE="0666" SUBSYSTEM=="usb", ATTRS{idVendor}=="1d4d", MODE="0666" SUBSYSTEM=="usb", ATTRS{idVendor}=="0471", MODE="0666" SUBSYSTEM=="usb", ATTRS{idVendor}=="04da", MODE="0666" SUBSYSTEM=="usb", ATTRS{idVendor}=="05c6", MODE="0666" SUBSYSTEM=="usb", ATTRS{idVendor}=="1f53", MODE="0666" SUBSYSTEM=="usb", ATTRS{idVendor}=="04e8", MODE="0666" SUBSYSTEM=="usb", ATTRS{idVendor}=="04dd", MODE="0666" SUBSYSTEM=="usb", ATTRS{idVendor}=="0fce", MODE="0666" SUBSYSTEM=="usb", ATTRS{idVendor}=="0930", MODE="0666" SUBSYSTEM=="usb", ATTRS{idVendor}=="19d2", MODE="0666" and my output of lsusb is Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 002: ID 064e:a110 Suyin Corp. HP Webcam Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 007: ID 12d1:1038 Huawei Technologies Co., Ltd. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub You can see that 12d1 is included inside of the 51-android.rules file, so I'm not sure where to go from here as everyone tells me to drop to a root shell which has not worked as well. Thanks in advance. ---UPDATE--- Thought I'd give some extra input on the matter real fast. If I perform an adb pull or an adb shell that seems to be working. However when I try to utilize adb push or nano while in the superuser adb shell I don't have permissions to modify. It recognizes my device, but that's it. I'm sure I have the rules set correctly, but the problem is I can use ` sudo -s ` and operate from within the root shell and I have the same output when using adb devices. Hopefully someone will have some thoughts as to what's going on.

I have just seen this line in logcat: I/ActivityManager( 235): Start proc com.huawei.updata for service com.huawei.updata/.service.HuaweiOnlineUpdataService: pid=24608 uid=10048 gids={2001, 3003} on a HUAWEI U8150 IDEOS with Android 2.2. Any idea what is the goal of this HuaweiOnlineUpdataService? Google has only 5 results for this term, with not enough information.

I am installing a custom rom for the very first time and I simply don't want to brick my phone (Huawei U8150). 1. I downloaded and installed Rom Manager 2. I downloaded Cyanogen 7 (update-cm-7.2.0-RC0-U8150-KANG-signed-dec5.zip) for my U8150 and stored it on SD card. 3. I started Rom Manager > Flash ClockMod Recovery > shows a list of supported phones. *It does not have U8150 in the list.* I wonder how others have made it work! 4. From ROM Manager I chosen the Rom file manually with "Install ROM from SD Card" option, it restarts and gives only for options a. reboot, b. apply update.zip c & d. wipe What to do next? The rom file is in .zip, while I downloaded another .img file (clockworkmod_5.0.2.7_u8150.img). What does it exactly do? I think i must first create backup of current rom and then install cyanogen.

I have a Huawei X3 (U8510) which I've purchased for testing Android applications I'm developing. I'd like to root this, but as I've not had any experience with rooting Android handsets, its something I'm approaching with some caution. What is the recommended way to root the X3? I've found mention of a Windows app called SuperOneClick , which looks like it may be useful. My development machine is a Mac, but I'm not adverse to using Windows apps to do this if its easier.

Recently I just downgraded my busybox to 1.18.2 version using the jRummy's BusyBox Installer. I was previously having busybox preinstalled by CM7.2 custom ROM. Then I immediately tried to install the latest, 1.19.4 version using the same app.. It could have shown some error message, but I wasn't sure. Maybe the download didn't proceed fully. But now onwards, I am getting "No root" message when I try to launch the BusyBox Installer. I tried everything, forgetting the app from SuperUser (by chainsfire) app and reauthorizing root for it, clearing data, rebooting the phone etc. Apps like link2sd also cannot get "root" privileges all of a sudden!! Strange thing is, z4root app detects my phone as already rooted. And when I try to click "re-root", the process goes on and on and nothing happens. Why has this happened? Is this because JRummy's busybox overwrites the CM7.2 build one? Should I never try updating busybox when I'm on CM7.2? or is it because I have to specify correct path? /system/xbin in that busybox installer? Now all I need is to make busybox and more importantly, get my root back to work properly hopefully without having to reinstall my ROM. Any ideas? Huawei IDEOS u8150 running Cyanogenmod 7.2-RC1 Update : I tried rooting/unrooting etc using SuperOneClick v 2.3.3.0. It doesn't work either. Here's its log (apparently there are lots of "illegal instruction" errors where it shouldn't be):- * daemon not running. starting it now on port 5037 * * daemon started successfully * export PS1="" # export PS1="" getprop ro.build.version.release > /data/local/tmp/output 2>&1 export TEMPRANDOM=31336 export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output 2.3.7 END:31336export PS1="" getprop ro.product.manufacturer > /data/local/tmp/output 2>&1 export TEMPRANDOM=93231 export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output Huawei END:93231export PS1="" getprop ro.product.model > /data/local/tmp/output 2>&1 export TEMPRANDOM=48975 export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output U8150 END:48975export PS1="" getprop ro.build.version.incremental > /data/local/tmp/output 2>&1 export TEMPRANDOM=38960 export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output eng.aorth.20120306.105455 END:38960export PS1="" ls -l /system/xbin/su > /data/local/tmp/output 2>&1 + Stopped (signal) ls -l /system/xbin/su >/data/local/tmp/output 2>&1 export TEMPRANDOM=96369 export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output Illegal instruction ls -l /system/xbin/su >/data/local/tmp/output 2>&1 END:96369export PS1="" ls -l /system/bin/su > /data/local/tmp/output 2>&1 + Stopped (signal) ls -l /system/bin/su >/data/local/tmp/output 2>&1 export TEMPRANDOM=35669 export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output Illegal instruction ls -l /system/bin/su >/data/local/tmp/output 2>&1 END:35669export PS1="" chmod 755 /data/local/tmp/busybox > /data/local/tmp/output 2>&1 + Stopped (signal) chmod 755 /data/local/tmp/busybox >/data/local/tmp/output 2>&1 export TEMPRANDOM=40902 export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output Illegal instruction chmod 755 /data/local/tmp/busybox >/data/local/tmp/output 2>&1 END:40902export PS1="" /data/local/tmp/busybox whoami > /data/local/tmp/output 2>&1 export TEMPRANDOM=40829 export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output /data/local/tmp/busybox: permission denied END:40829export PS1="" busybox whoami > /data/local/tmp/output 2>&1 + Stopped (signal) busybox whoami >/data/local/tmp/output 2>&1 export TEMPRANDOM=31488 export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output Illegal instruction busybox whoami >/data/local/tmp/output 2>&1 END:31488export PS1="" rm /data/local/tmp/boomsh > /data/local/tmp/output 2>&1 + Stopped (signal) rm /data/local/tmp/boomsh >/data/local/tmp/output 2>&1 export TEMPRANDOM=65795 export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output Illegal instruction rm /data/local/tmp/boomsh >/data/local/tmp/output 2>&1 END:65795export PS1="" rm /data/local/tmp/sh > /data/local/tmp/output 2>&1 + Stopped (signal) rm /data/local/tmp/sh >/data/local/tmp/output 2>&1 export TEMPRANDOM=78056 export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output Illegal instruction rm /data/local/tmp/sh >/data/local/tmp/output 2>&1 END:78056export PS1="" chmod 700 /data/local/tmp/zergRush > /data/local/tmp/output 2>&1 + Stopped (signal) chmod 700 /data/local/tmp/zergRush >/data/local/tmp/output 2>&1 export TEMPRANDOM=86427 export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output Illegal instruction chmod 700 /data/local/tmp/zergRush >/data/local/tmp/output 2>&1 END:86427export PS1="" cd /data/local/tmp/ > /data/local/tmp/output 2>&1 export TEMPRANDOM=46214 export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output END:46214export PS1="" export TEMPRANDOM=23335;export PS1=END:$TEMPRANDOM;./zergRush ./zergRush: permission denied END:23335export PS1="" * daemon not running. starting it now on port 5037 * * daemon started successfully * export PS1="" # export PS1="" getprop ro.build.version.release > /data/local/tmp/output 2>&1 export TEMPRANDOM=81716 export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output 2.3.7 END:81716export PS1="" getprop ro.product.manufacturer > /data/local/tmp/output 2>&1 export TEMPRANDOM=13472 export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output Huawei END:13472export PS1="" getprop ro.product.model > /data/local/tmp/output 2>&1 export TEMPRANDOM=98688 export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output U8150 END:98688export PS1="" getprop ro.build.version.incremental > /data/local/tmp/output 2>&1 export TEMPRANDOM=22140 export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output eng.aorth.20120306.105455 END:22140export PS1="" chmod 755 /data/local/tmp/busybox > /data/local/tmp/output 2>&1 + Stopped (signal) chmod 755 /data/local/tmp/busybox >/data/local/tmp/output 2>&1 export TEMPRANDOM=82615 export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output Illegal instruction chmod 755 /data/local/tmp/busybox >/data/local/tmp/output 2>&1 END:82615export PS1="" /data/local/tmp/busybox whoami > /data/local/tmp/output 2>&1 export TEMPRANDOM=43597 export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output /data/local/tmp/busybox: permission denied END:43597export PS1="" busybox whoami > /data/local/tmp/output 2>&1 + Stopped (signal) busybox whoami >/data/local/tmp/output 2>&1 export TEMPRANDOM=15262 export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output Illegal instruction busybox whoami >/data/local/tmp/output 2>&1 END:15262export PS1="" ls -l /system/xbin/su > /data/local/tmp/output 2>&1 + Stopped (signal) ls -l /system/xbin/su >/data/local/tmp/output 2>&1 export TEMPRANDOM=64824 export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output Illegal instruction ls -l /system/xbin/su >/data/local/tmp/output 2>&1 END:64824export PS1="" ls -l /system/bin/su > /data/local/tmp/output 2>&1 + Stopped (signal) ls -l /system/bin/su >/data/local/tmp/output 2>&1 export TEMPRANDOM=74020 export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output Illegal instruction ls -l /system/bin/su >/data/local/tmp/output 2>&1 END:74020export PS1="" rm /data/local/tmp/boomsh > /data/local/tmp/output 2>&1 + Stopped (signal) rm /data/local/tmp/boomsh >/data/local/tmp/output 2>&1 export TEMPRANDOM=74614 export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output Illegal instruction rm /data/local/tmp/boomsh >/data/local/tmp/output 2>&1 END:74614export PS1="" rm /data/local/tmp/sh > /data/local/tmp/output 2>&1 + Stopped (signal) rm /data/local/tmp/sh >/data/local/tmp/output 2>&1 export TEMPRANDOM=16835 export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output Illegal instruction rm /data/local/tmp/sh >/data/local/tmp/output 2>&1 END:16835export PS1="" chmod 700 /data/local/tmp/zergRush > /data/local/tmp/output 2>&1 + Stopped (signal) chmod 700 /data/local/tmp/zergRush >/data/local/tmp/output 2>&1 export TEMPRANDOM=27596 export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output Illegal instruction chmod 700 /data/local/tmp/zergRush >/data/local/tmp/output 2>&1 END:27596export PS1="" cd /data/local/tmp/ > /data/local/tmp/output 2>&1 export TEMPRANDOM=49127 export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output END:49127export PS1="" export TEMPRANDOM=29618;export PS1=END:$TEMPRANDOM;./zergRush ./zergRush: permission denied END:29618export PS1="" * daemon not running. starting it now on port 5037 * * daemon started successfully * export PS1="" # export PS1="" chmod 755 /data/local/tmp/busybox > /data/local/tmp/output 2>&1 + Stopped (signal) chmod 755 /data/local/tmp/busybox >/data/local/tmp/output 2>&1 export TEMPRANDOM=12726 export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output Illegal instruction chmod 755 /data/local/tmp/busybox >/data/local/tmp/output 2>&1 END:12726export PS1="" /data/local/tmp/busybox whoami > /data/local/tmp/output 2>&1 export TEMPRANDOM=54207 export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output /data/local/tmp/busybox: permission denied END:54207export PS1="" busybox whoami > /data/local/tmp/output 2>&1 + Stopped (signal) busybox whoami >/data/local/tmp/output 2>&1 export TEMPRANDOM=21168 export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output Illegal instruction busybox whoami >/data/local/tmp/output 2>&1 END:21168export PS1="" getprop ro.product.manufacturer > /data/local/tmp/output 2>&1 export TEMPRANDOM=95174 export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output Huawei END:95174export PS1="" getprop ro.product.model > /data/local/tmp/output 2>&1 export TEMPRANDOM=36720 export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output U8150 END:36720export PS1="" getprop ro.build.version.incremental > /data/local/tmp/output 2>&1 export TEMPRANDOM=21915 export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output eng.aorth.20120306.105455 END:21915export PS1="" getprop ro.build.version.release > /data/local/tmp/output 2>&1 export TEMPRANDOM=37315 export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output 2.3.7 END:37315export PS1="" rm /data/local/tmp/boomsh > /data/local/tmp/output 2>&1 + Stopped (signal) rm /data/local/tmp/boomsh >/data/local/tmp/output 2>&1 export TEMPRANDOM=54134 export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output Illegal instruction rm /data/local/tmp/boomsh >/data/local/tmp/output 2>&1 END:54134export PS1="" rm /data/local/tmp/sh > /data/local/tmp/output 2>&1 + Stopped (signal) rm /data/local/tmp/sh >/data/local/tmp/output 2>&1 export TEMPRANDOM=90391 export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output Illegal instruction rm /data/local/tmp/sh >/data/local/tmp/output 2>&1 END:90391export PS1="" chmod 700 /data/local/tmp/zergRush > /data/local/tmp/output 2>&1 + Stopped (signal) chmod 700 /data/local/tmp/zergRush >/data/local/tmp/output 2>&1 export TEMPRANDOM=35822 export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output Illegal instruction chmod 700 /data/local/tmp/zergRush >/data/local/tmp/output 2>&1 END:35822export PS1="" cd /data/local/tmp/ > /data/local/tmp/output 2>&1 export TEMPRANDOM=58244 export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output END:58244export PS1="" export TEMPRANDOM=61534;export PS1=END:$TEMPRANDOM;./zergRush ./zergRush: permission denied END:61534export PS1="" * daemon not running. starting it now on port 5037 * * daemon started successfully * export PS1="" # export PS1="" getprop ro.product.manufacturer > /data/local/tmp/output 2>&1 export TEMPRANDOM=32756 export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output Huawei END:32756export PS1="" getprop ro.product.model > /data/local/tmp/output 2>&1 export TEMPRANDOM=45540 export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output U8150 END:45540export PS1="" getprop ro.build.version.incremental > /data/local/tmp/output 2>&1 export TEMPRANDOM=53091 export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output eng.aorth.20120306.105455 END:53091export PS1="" chmod 755 /data/local/tmp/sqlite3 > /data/local/tmp/output 2>&1 + Stopped (signal) chmod 755 /data/local/tmp/sqlite3 >/data/local/tmp/output 2>&1 export TEMPRANDOM=38213 export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output Illegal instruction chmod 755 /data/local/tmp/sqlite3 >/data/local/tmp/output 2>&1 END:38213export PS1="" chmod 755 /data/local/tmp/busybox > /data/local/tmp/output 2>&1 + Stopped (signal) chmod 755 /data/local/tmp/busybox >/data/local/tmp/output 2>&1 export TEMPRANDOM=66171 export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output Illegal instruction chmod 755 /data/local/tmp/busybox >/data/local/tmp/output 2>&1 END:66171export PS1="" /data/local/tmp/busybox whoami > /data/local/tmp/output 2>&1 export TEMPRANDOM=57497 export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output /data/local/tmp/busybox: permission denied END:57497export PS1="" busybox whoami > /data/local/tmp/output 2>&1 + Stopped (signal) busybox whoami >/data/local/tmp/output 2>&1 export TEMPRANDOM=13769 export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output Illegal instruction busybox whoami >/data/local/tmp/output 2>&1 END:13769export PS1="" # export PS1="" /data/local/tmp/sqlite3 /data/local/tmp/busybox: permission denied "update secure set value = 1 where name = 'install_non_market_apps';" > /data/local/tmp/output 2>&1 export TEMPRANDOM=60939 export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output /data/local/tmp/sqlite3: permission denied END:60939* daemon not running. starting it now on port 5037 * * daemon started successfully * export PS1="" # export PS1="" getprop ro.build.version.release > /data/local/tmp/output 2>&1 export TEMPRANDOM=14443 export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output 2.3.7 END:14443export PS1="" getprop ro.product.manufacturer > /data/local/tmp/output 2>&1 export TEMPRANDOM=20422 export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output Huawei END:20422export PS1="" getprop ro.product.model > /data/local/tmp/output 2>&1 export TEMPRANDOM=70730 export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output U8150 END:70730export PS1="" getprop ro.build.version.incremental > /data/local/tmp/output 2>&1 export TEMPRANDOM=78056 export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output eng.aorth.20120306.105455 END:78056export PS1="" ls -l /system/xbin/su > /data/local/tmp/output 2>&1 + Stopped (signal) ls -l /system/xbin/su >/data/local/tmp/output 2>&1 export TEMPRANDOM=37836 export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output Illegal instruction ls -l /system/xbin/su >/data/local/tmp/output 2>&1 END:37836export PS1="" ls -l /system/bin/su > /data/local/tmp/output 2>&1 + Stopped (signal) ls -l /system/bin/su >/data/local/tmp/output 2>&1 export TEMPRANDOM=86202 export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output Illegal instruction ls -l /system/bin/su >/data/local/tmp/output 2>&1 END:86202export PS1="" chmod 755 /data/local/tmp/busybox > /data/local/tmp/output 2>&1 + Stopped (signal) chmod 755 /data/local/tmp/busybox >/data/local/tmp/output 2>&1 export TEMPRANDOM=53011 export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output Illegal instruction chmod 755 /data/local/tmp/busybox >/data/local/tmp/output 2>&1 END:53011export PS1="" /data/local/tmp/busybox whoami > /data/local/tmp/output 2>&1 export TEMPRANDOM=68114 export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output /data/local/tmp/busybox: permission denied END:68114export PS1="" busybox whoami > /data/local/tmp/output 2>&1 + Stopped (signal) busybox whoami >/data/local/tmp/output 2>&1 export TEMPRANDOM=82093 export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output Illegal instruction busybox whoami >/data/local/tmp/output 2>&1 END:82093export PS1="" rm /data/local/tmp/boomsh > /data/local/tmp/output 2>&1 + Stopped (signal) rm /data/local/tmp/boomsh >/data/local/tmp/output 2>&1 export TEMPRANDOM=45163 export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output Illegal instruction rm /data/local/tmp/boomsh >/data/local/tmp/output 2>&1 END:45163export PS1="" rm /data/local/tmp/sh > /data/local/tmp/output 2>&1 + Stopped (signal) rm /data/local/tmp/sh >/data/local/tmp/output 2>&1 export TEMPRANDOM=26553 export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output Illegal instruction rm /data/local/tmp/sh >/data/local/tmp/output 2>&1 END:26553export PS1="" chmod 700 /data/local/tmp/zergRush > /data/local/tmp/output 2>&1 + Stopped (signal) chmod 700 /data/local/tmp/zergRush >/data/local/tmp/output 2>&1 export TEMPRANDOM=62881 export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output END:62881export PS1="" Illegal instruction chmod 700 /data/local/tmp/zergRush >/data/local/tmp/output 2>&1 cd /data/local/tmp/ > /data/local/tmp/output 2>&1 export TEMPRANDOM=37090 export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output END:37090export PS1="" export TEMPRANDOM=66693;export PS1=END:$TEMPRANDOM;./zergRush ./zergRush: permission denied END:66693export PS1=""

I wanted to know if my Huawei IDEOS u8150 is ARMv6 or ARMv6 VFP . One thing I know is that it is ARMv6 but is it VFP? Any good ways to find out? Huawei documentation/site/forums doesn't say anything about this. I need to know because in the Android Market for video players, there are different versions for different processor types like ARM6 and ARM6 VFP versions.

I have a Huawei IDEOS u8150 running Froyo. Ever since I got this device, I've been running into low disk space problems (because of only 150 MB internal space). So I've had enough and moved all the apps I can to SD card. Then again, some were not movable. So I did a little research and saw this article on loading apps to the SD card by default . It seemed to work rather weirdly, as some apps which couldn't be moved to the SD card before, now can be moved after using that trick. Still, the system apps and vendor bundled apps remained in the internal memory. Also, most of the moved apps still took some space on the internal memory. The Froyo's app2sd rather seems to be behaving oddly according to me (though I've searched online and found this is normal, sadly). **What I want to know is :** 1. Will rooting enable me to further enhance my Froyo's app2sd function? 2. Will custom mods be a better option with space management for my phone? If so, which ones? 3. Right now I have apps that I really need and use and I'm stuck with low disk space. (Please dont link me to anywhere; I've done all I can with cleared caches and I have no more apps to uninstall which I don't need.) I've heard that z4root takes 22MB+ internal space. Is there anything else to root using adb or something that wont require internal space? Or if I use z4root itself, can I remove the app fully after rooting and still have root? What about SuperOneClick's space cost?